Bubbles or Foam
Paint bubbles or foam can form during application and may burst, leaving craters on the surface.
What Causes Foaming or Cratering?
- Shaking a partially filled paint can
- Using old or low-quality paint
- Over-rolling or brushing too quickly
- Using the wrong roller nap
- Applying gloss paint without priming
How to Prevent It
- Avoid excessive rolling or brushing
- Use fresh, high-quality paint
- Prime porous surfaces
- Use the correct roller nap
- Stir paint gently instead of shaking
Lap or Brush Marks
Lap marks appear as darker or glossier patches where wet and dry paint overlap.
What Causes Lap Marks?
- Letting sections dry before overlapping
- Poor-quality paint with high solids
- Painting porous or warm surfaces
How to Prevent Lap Marks
- Maintain a wet edge while painting
- Work in small sections
- Paint from wet to dry, not dry to wet
- Use a quality acrylic latex paint
- Prime porous surfaces before painting
Roller Marks (Stipple)
Roller stipple is an unwanted textured pattern left by the roller.
What Causes It?
- Incorrect or low-quality roller cover
- Poor application technique
- Low-grade paint
How to Fix It
- Use the correct roller nap
- Use quality paint and rollers
- Apply paint evenly using a “W” or “M” pattern
- Avoid paint buildup at roller ends
Roller Spattering
Roller spattering occurs when paint droplets are flung off the roller.
What Causes It?
- Overloading the roller
- Overworking the paint
- Using low-quality or exterior paint indoors
How to Prevent It
- Use high-quality paint and rollers
- Work in small sections
- Use proper rolling technique
Paint Sagging
Sagging appears as drips or runs shortly after paint application.
What Causes Paint Sagging?
- Applying paint too thickly
- Cold or humid conditions
- Over-thinned paint
- Incorrect spray technique
How to Prevent It
- Apply two thin coats instead of one thick coat
- Avoid painting in humid or cold weather
- Do not thin paint
- Sand and repaint sagged areas if dried
Wrinkling
Wrinkling occurs when paint dries unevenly, forming a rough, crinkled surface.
What Causes It?
- Applying paint too thickly
- Extreme temperatures or humidity
- Painting over uncured primer
- Dirty or contaminated surfaces
How to Fix It
- Scrape or sand wrinkled paint
- Allow primer to fully dry
- Repaint under proper conditions
Burnishing
Burnishing occurs when a painted surface is repeatedly rubbed or cleaned, causing shiny or glossy patches to appear—especially on flat or low-sheen paints.
What Causes Burnishing?
- Frequent washing or spot cleaning, especially with abrasive cleaners
- Using flat or low scrub-resistant paint in high-traffic areas
- Furniture or objects rubbing against painted surfaces
How to Prevent Burnishing
- Use high-quality satin, semi-gloss, or gloss paints in high-traffic areas
- Avoid placing furniture directly against painted walls
- Allow paint to cure for at least two weeks before washing
- Clean gently using soft cloths or non-abrasive cleaners
Poor Scrub Resistance
Poor scrub resistance causes paint to wear off, dull, or scratch easily when cleaned.
What Causes It?
- Using flat or low-quality paint
- Aggressive scrubbing or harsh cleaners
- Washing paint before it fully cures
How to Prevent It
- Use semi-gloss or gloss paint in high-use areas
- Allow paint to cure fully (usually 7 days)
- Clean gently with mild cleaners
Poor Sheen Uniformity
Uneven sheen causes shiny or dull patches on painted surfaces.
What Causes It?
- Uneven paint application
- Poor surface priming
- Failure to maintain a wet edge
How to Prevent It
- Prime and seal new or porous surfaces
- Apply paint evenly from wet to dry
- Apply an additional coat if needed
Fading of Colors
Color fading makes paint look dull and lifeless, especially in sunny areas.
What Causes It?
- Inferior paint quality
- UV exposure
- Incorrect tinting
- Thin paint application
How to Prevent It
- Use UV-resistant exterior paints
- Apply at the recommended thickness
- Choose lighter shades
Poor Alkali Resistance
Poor Alkali Resistance
What Causes It?
- Painting uncured masonry
- Using oil-based paint on new surfaces
How to Prevent It
- Allow masonry to cure for at least 30 days (ideally 1 year)
- Use alkali-resistant primers and sealers
Cracks or Flakes
Cracking or flaking paint is often caused by aging paint or poor application. Small hairline cracks can worsen over time, eventually leading to peeling.
What Causes Cracking or Flaking?
- Low-quality paint with poor adhesion
- Oil-based paint applied over latex paint
- Paint applied too thinly
- Poor surface preparation or lack of priming
- Paint is drying too quickly due to the weather
- Recoating before the previous coat has dried
How to Fix It
- Remove loose paint, sand smooth, prime bare areas, and repaint
- For severe cases, strip all paint, prime properly, and repaint using quality latex paint
Peeling of Paint
Peeling occurs when paint loses adhesion and separates from the surface.
What Causes It?
- Moisture seepage
- Poor surface preparation
- Inferior paint quality
- Painting over wet surfaces
How to Fix It
- Eliminate moisture sources
- Remove loose paint and prepare the surface properly
- Repaint following label instructions
Crusty White Mottling
White salt deposits appear when moisture moves through masonry surfaces.
What Causes It?
- Poor surface preparation
- Trapped moisture in masonry
How to Fix It
- Eliminate moisture sources
- Remove deposits thoroughly
- Seal and repaint with quality exterior paint
Leaching
Leaching appears as brown, sticky or glossy patches, especially in humid areas.
What Causes It?
- High humidity, especially in bathrooms
- Latex paint before full curing
How to Fix It
- Wash with soap and water
- Allow paint to dry thoroughly
- Remove stains before repainting
Chalking or Powdering
Chalking is the formation of a powdery surface on the paint due to weathering.
What Causes It?
- Poor-quality paint
- Incorrect application thickness
- Using interior paint outdoors
How to Fix It
- Wash and remove all chalk residue
- Repaint with high-quality acrylic exterior paint
Dirt or Dust Pickup
Dirt pickup can make painted surfaces look dirty or stained.
What Causes It?
- Low-quality paint
- Environmental pollution
- Soil splashing
How to Fix It
- Wash and dry the surface
- Use high-quality exterior paint with dirt resistance
Fading of Colors
Color fading makes paint look dull and lifeless, especially in sunny areas.
What Causes It?
- Inferior paint quality
- UV exposure
- Incorrect tinting
- Thin paint application
How to Prevent It
- Use UV-resistant exterior paints
- Apply at the recommended thickness
- Choose lighter shades
Application &
Workmanship Issues
Problems caused during painting due to technique, tools, or conditions. These issues occur during paint application or shortly afterward.
Improper tools, wrong technique, incorrect roller nap, over-application, and poor weather conditions.
Paint Selection
& Quality Issues
Problems caused by using the wrong paint type, sheen, or low-quality products. These issues appear after use, cleaning, or exposure.
Wrong sheen for the area, low-grade paint, lack of UV or alkali resistance.
Surface
Preparation Issues
Problems caused by inadequate surface preparation before painting. These issues usually develop over time.
No priming, painting on uncured masonry, moisture trapped in walls, poor cleaning.
Moisture &
Environmental Issues
Problems caused by humidity, water seepage, or environmental exposure. These issues are common in bathrooms, kitchens, exteriors, and coastal areas.
High humidity, leaks, poor ventilation, and moisture migration.
Weathering
& Aging Issues
Problems that develop gradually over time and with exposure. These issues are long-term durability indicators.
Sunlight, pollution, rain, and low-quality exterior paint.
Nothing But The best!
Water Based
Low Dirt Retention
Mould & Fungus Resistance 
High Solar reflect 
